C P - 3 2 0 0 F CONNER NO MORE PRODUCED Native| Translation ------+-----+-----+----- Form 3.5"/HH Cylinders 1366| | | Capacity form/unform 212/ MB Heads 8| | | Seek time / track 16.0/ 5.0 ms Sector/track 38| | | Controller SCSI1 SINGLE-ENDED Precompensation Cache/Buffer 64 KB Landing Zone Data transfer rate 1.500 MB/S int Bytes/Sector 512 5.000 MB/S ext SYNC Recording method RLL 1/7 operating | non-operating -------------+-------------- Supply voltage 5/12 V Temperature *C 5 55 | -40 60 Power: sleep W Humidity % 8 80 | 8 80 standby W Altitude km -0.061 3.050| 12.200 idle 4.2 W Shock g 5 | 50 seek 6.3 W Rotation RPM 3485 read/write 6.0 W Acoustic dBA 40 spin-up W ECC Bit MTBF h 150000 Warranty Month Lift/Lock/Park YES Certificates ********************************************************************** L A Y O U T ********************************************************************** CONNER CP3200F CUSTOMER OPTIONS +-------------------------------------------------------+ |1-+J1 ++ |XX || | Serial || |XX SCSI || | IN/OUT +-+E3 || |XX I || | | |E2 ++ |XX N || | +-+E1 ++ |XX T J2 |+-+ TERMINATORS || |XX E | || |XX R | ++ |XX F | ++ |XX A | || |XX C | || |XX E | ++ |XX | |XX1 | | | +-J3--HDA--+ |XX Power J4 | +----------+ |XX +-------------------------------------------------------+ 1 ********************************************************************** J U M P E R S ********************************************************************** CONNER CP3200F CUSTOMER OPTIONS Jumper setting -------------- SCSI ID Jumpers --------------- +--------------+----------+--------+--------+ | Drive Select | E1 | E2 | E3 | +--------------+----------+--------+--------+ | 0 | OPEN | OPEN | OPEN | | 1 | CLOSED | OPEN | OPEN | | 2 | OPEN | CLOSED | OPEN | | 3 | CLOSED | CLOSED | OPEN | | 4 | OPEN | OPEN | CLOSED | | 5 | CLOSED | OPEN | CLOSED | | 6 | OPEN | CLOSED | CLOSED | | 7 | CLOSED | CLOSED | CLOSED | +--------------+----------+--------+--------+ There are three jumpers available for configuration. E1, E2, and E3 are used to select the drive's SCSI ID. Note: SCSI parity is always enabled. Parity ------ PARITY IS ALWAYS ENABLED! Do not connect the drive to systems which use Parity Disabled! J4 Power --------- +---------+ | 1 2 3 4 | +-+-+-+-+-+ | | | +----------- + 5V | | +------------- GND | +--------------- GND +----------------- + 12V ********************************************************************** I N S T A L L ********************************************************************** CONNER CP3200F CUSTOMER OPTIONS Mounting Holes -------------- Side: 6-32 UNC-2B .15 Max. Insertion Bottom: 6-32 UNC-2B .25 Max. Insertion