Data bus:	16-bit ISA
Size:	Three/quarter-length, full-height card
Hard drive supported:	Two IDE (AT) interface drives
Floppy drives supported:	Two 360KB, 720KB, 1.2MB, or 1.44MB drives

CONNECTIONS
Function	Location
40-pin IDE (AT) interface connector	J1
34-pin control cable connector - floppy drive	J4
4-pin connector - drive active LED	J6

USER CONFIGURABLE SETTINGS
» Function		Location	Setting
»	IRQ14 enabled	J2/pins 2 & 3	closed
	XIRQ14 enabled	J2/pins 1 & 2	closed
»	Factory configured - do not alter	J3	N/A
»	Factory setting	J7/pins 2 & 3	closed
	Two speed spindle type drive	J7/pins 1 & 2	closed
»	Hard drive enabled	J8/pins 1 & 2	closed
	Hard drive disabled	J8/pins 2 & 3	closed