Data Bus	16-bit ISA
Card Size	Third height, half length
Hard Drives Supported	Two IDE(AT) devices
Floppy Drives Supported	Two 360KB, 720KB, 1.2MB, or 1.44MB drives

CONNECTIONS
Function	Label	Function	Label
34-pin cable connector - floppy drive	CON1	2-pin drive active LED	LED
40-pin primary IDE(AT) connector	CON2

USER CONFIGURABLE SETTINGS
Setting	Label	Position
IRQ14 enabled	JP1	Pins 2 & 3 closed
IRQ14 disabled	JP1	Pins 1 & 2 closed
IDE IOCHRDY signal enabled	JP2	Pins 2 & 3 closed
IDE IOCHRDY signal disabled	JP2	Pins 1 & 2 closed
Factory configured - do not alter	JP3	Pins 1 & 2 closed
Floppy interface uses primary address	JP4	Pins 1 & 2 closed
Floppy interface uses secondary address	JP4	Pins 2 & 3 closed
Floppy interface enabled	JP5	Pins 1 & 2 closed
Floppy interface disabled	JP5	Pins 2 & 3 closed
IDE(AT) interface enabled	JP6	Pins 1 & 2 closed
IDE(AT) interface disabled	JP6	Pins 2 & 3 closed
IDE(AT) interface uses primary address	JP7	Pins 1 & 2 closed
IDE(AT) interface uses secondary address	JP7	Pins 2 & 3 closed