7 2 5 7 7 A P MAXTOR NO MORE PRODUCED Native| Translation ------+-----+-----+----- Form 3.5"/SLIMLINE Cylinders | 4996| | Capacity form/unform 2577/ MB Heads 8| 16| | Seek time / track 12.0/ 2.0 ms Sector/track | 63| | Controller IDE / ATA2 FAST/ENHA Precompensation Cache/Buffer 128 KB MAXCACHE Landing Zone Data transfer rate 5.000 MB/S int Bytes/Sector 512 16.700 MB/S ext PIO4 Recording method RLL 1/7 operating | non-operating -------------+-------------- Supply voltage 5/12 V Temperature *C 5 55 | -40 71 Power: sleep 0.4 W Humidity % 5 95 | 5 95 standby 0.6 W Altitude km -0.061 3.048| -0.061 12.192 idle 4.5 W Shock g 35 | 150 seek 5.4 W Rotation RPM 4480 read/write 5.5 W Acoustic dBA 39 spin-up 13.3 W ECC Bit MTBF h 300000 Warranty Month Lift/Lock/Park YES Certificates ********************************************************************** L A Y O U T ********************************************************************** MAXTOR 72700AP/72577AP/72025AP/71687A/AP/71350A/AP QUICK REFERENCE J1 IDE Interface J2 Power +----------------------------------------++J50------J42------+ |o o o o o o o o o o o o o o o o o o o 1 || o o o o | OOOO | |o o o o o o o o o o o o o o o o o o o || o o o o o | | +----------------------------------------++-----------+------+ ==================================================================== J1 IDE Interface J2 Power +----------------------------------------++J46--J42---+------+ |o o o o o o o o o o o o o o o o o o o 1 || o o o | OOOO | |o o o o o o o o o o o o o o o o o o o || o o o | | +----------------------------------------++-----------+------+ ********************************************************************** J U M P E R S ********************************************************************** MAXTOR 72700AP/72577AP/72025AP/71687A/AP/71350A/AP QUICK REFERENCE Jumper Setting ============== J1 IDE Interface J2 Power +----------------------------------------++J50------J42------+ |o o o o o o o o o o o o o o o o o o o 1 || o o o o | OOOO | |o o o o o o o o o o o o o o o o o o o || o o o o o | | +----------------------------------------++-----------+------+ J50 Master Slave ----------------- CLOSED Only drive in single drive system (default) CLOSED Master in dual drive system OPEN Slave in dual drive system J48 Cable Select ----------------- OPEN Disabled (default) CLOSED Enabled J46 Write Cache ---------------- OPEN Enabled (default) CLOSED Disabled J44 FACTORY RESERVED -------------------- OPEN J42 4092 Cylinder Option ------------------------- OPEN Disabled (default) CLOSED Enabled Setting System BIOS ------------------- Power up the computer and set the system BIOS/CMOS to Type 9. NOTE Refer to your system's user guide for help on enabling and programming system BIOS CMOS. Type 9 should equal 900 cylinders 15 heads and 17 sectors per track (SPT). If BIOS Type 9 does not match these parameters, select a user definable drive type and program the BIOS with 900 cylinders, 15 heads and 17 SPT. If the BIOS does not have a user-definable drive type, choose a drive type with 15 heads and 17 SPT. This will allow the system to see the hard drive. Important Note for Installing Drives larger than 2.1GB ------------------------------------------------------ If your system locks up before you can access the system BIOS/CMOS, the system may have a BIOS with a 4095 cylinder limitation. Please perform the following steps: 1. Turn off the system. 2. Install jumper J42 on the drive using the spare jumper supplied. 3. Restart the system and set the system BIOS/CMOS to Type 9. =================================================================== J1 IDE Interface J2 Power +----------------------------------------++J46--J42---+------+ |o o o o o o o o o o o o o o o o o o o 1 || o o o | OOOO | |o o o o o o o o o o o o o o o o o o o || o o o | | +----------------------------------------++-----------+------+ J46 Master Slave ----------------- CLOSED Only drive in single drive system (default) CLOSED Master in dual drive system OPEN Slave in dual drive system J44 Cable Select ----------------- OPEN Disabled (default) CLOSED Enabled J42 Write Cache ---------------- OPEN Enabled (default) CLOSED Disabled