S T 5 2 5 2 0 A M E D A L I S . P R O SEAGATE Native| Translation ------+-----+-----+----- Form 3.5"/SLIMLINE Cylinders | 4970| 621| 1024 Capacity form/unform 2564/ MB Heads 4| 16| | 16 Seek time / track 11.0/ 3.5 ms Sector/track | 63| 63| 63 Controller IDE / ATA3 ENHANCED Precompensation Cache/Buffer 128 KB MULTI-SEGMEN Landing Zone Data transfer rate 14.500 MB/S int Bytes/Sector 512 16.600 MB/S ext PIO4 Recording method PRML operating | non-operating -------------+-------------- Supply voltage 5/12 V Temperature *C 5 55 | -40 70 Power: sleep W Humidity % | standby 1.0 W Altitude km | idle 3.2 W Shock g 10 | 75 seek 7.0 W Rotation RPM 5400 read/write 5.7 W Acoustic dBA 27 spin-up W ECC Bit MTBF h 500000 Warranty Month 36 Lift/Lock/Park YES Certificates ********************************************************************** L A Y O U T ********************************************************************** SEAGATE ST52520A MEDALIST PRO 2520AT JUMPER SETTING +---------------------------------------------------------+ | |XXPOWER | |XX | |+-+1 | || | J4 | || | | |+-+ | |XX1 | |XX | |XX | |XX I/O | |XX | |XX Pin-20 | |XX KEY | |XX | |XX | |XX +---------------------------------------------------------+ ********************************************************************** J U M P E R S ********************************************************************** SEAGATE ST52520A MEDALIST PRO 2520AT JUMPER SETTING Jumper Setting ============== POWER -------1+-------1-+---------+ TOP (HDA) XXXXXXXX| : : : : | O O O O |-- -----+8+-+-+-+-+-5-G-G-12+ BOTTOM | | | | | | | +-- Remote LED (1-, 2+) | | +---- Alternate Capacity (see below) | +------ Slave Present (used on Master) | +------ Cable Select (when Slave ON) +-------- Master OFF, Slave ON (spare jumper stored on pins 6-8) Alternate Capacity jumper sets the default cylinder translation to 1024 to solve issues with certain BIOS that only auto-detect. Total available sectors are still at full capacity as reported via Identify Drive data words 52-61. Third party partitioning software may be needed to achieve full capacity if this option jumper is used.