ORBITON CORPORATION
ORBIT XT I/O-PERFECT
Card Type |
Multi-I/O card |
Chip Set |
ASIC |
I/O Options |
Floppy drive interface, game port, parallel port, serial ports (2) |
Floppy drives supported |
Two 360KB, 720KB, 1.2MB, or 1.44MB drives |
Data Bus |
8-bit ISA |
Card Size |
Half-length, full-height |
CONNECTIONS | |||
Function |
Label |
Function |
Label |
Serial port 1 |
CN1 |
Parallel port |
CN4 |
Serial port 2 |
CN2 |
34-pin cable connector - floppy drive |
CN5 |
Game port |
CN3 |
USER CONFIGURABLE SETTINGS | ||
Function |
Label |
Position |
Enable serial port 2 |
JP6 |
Open |
Disable serial port 2 |
JP6 |
Closed |
Enable serial port 1 |
JP7 |
Open |
Disable serial port 1 |
JP7 |
Closed |
PARALLEL PORT ADDRESS SELECTION | ||
Setting |
JP1 |
JP2 |
LPT1 (378h) |
Pins 1 & 2 closed |
Pins 2 & 3 closed |
LPT2 (278h) |
Pins 2 & 3 closed |
Pins 2 & 3 closed |
Disabled |
- |
Pins 1 & 2 closed |
SERIAL PORT 1 ADDRESS SELECTION | ||
Setting |
JP3 |
JP4 |
COM1 (3F8h) |
Pins 1 & 2 closed |
Pins 1 & 2 closed |
COM2 (2F8h) |
Pins 2 & 3 closed |
Pins 2 & 3 closed |
BIOS ADDRESS SELECTION | |
Address |
JP10 |
CA00h |
Pins 1 & 2 closed, pins 3 & 4 closed |
CC00h |
Pins 2 & 4 closed, pins 1 & 3 closed |
CE00h |
Pins 1 & 2 closed, pins 5 & 6 closed |
FLOPPY DISK CONTROLLER SELECTION | |||
Setting |
JP5 |
JP8 |
JP9 |
Enable |
Closed |
Open |
Closed |
Disable |
Open |
Closed |
Open |