Processor	CX M1/AM K5/Pentium
Processor Speed	66/75/90/100/120/125/133/150/166/180/200MHz
Chip Set	Intel
Video Chip Set	None
Maximum Onboard Memory	128MB (EDO supported)
Maximum Video Memory	None
Cache	256/512KB
BIOS	Award
Dimensions	280mm x 220mm
I/O Options	32-bit PCI slots (4), floppy drive interface, green PC connector, IDE interfaces (2), parallel port, PS/2 mouse interface, serial ports (2), cache slot, IR connector, USB connectors (2)
NPU Options	None

CONNECTIONS
Purpose	Location	Purpose	Location
Floppy drive interface	CN1	PS/2 mouse interface	J99
Serial port 1	CN2	Chassis fan power	JP1
Serial port 2	CN3	IR connector	JP3
Parallel port	CN4	Reset switch	JP12
IDE interface 1	J6	Green PC connector	JP15
IDE interface 2	J7	IDE interface LED	JP22
USB connector	J10	Green PC LED	JP33
USB connector	J11	32-bit PCI slots	PC1 - PC4
Speaker	J12	Cache slot	SL1
Power LED & keylock	J14

USER CONFIGURABLE SETTINGS
Function		Label	Position
»	Factory configured - do not alter	J107	Open
	Monitor type select EGA/CGA	JP7	Closed
	Monitor type select monochrome	JP7	Open
	Monitor type select VGA	JP7	Any setting
»	Password normal operation	JP9	Open
	Password clear	JP9	Closed
	Flash BIOS voltage select 12v	JP19	Pins 1 & 2 closed
	Flash BIOS voltage select 5v	JP19	Pins 2 & 3 closed
»	CMOS memory normal operation	JP21	Open
	CMOS memory clear	JP21	Closed

DRAM CONFIGURATION
Size	Bank 0	Bank 1
8MB	(2) 1M x 36	None
16MB	(2) 2M x 36	None
16MB	(2) 1M x 36	(2) 1M x 36
24MB	(2) 2M x 36	(2) 1M x 36
32MB	(2) 2M x 36	(2) 2M x 36
40MB	(2) 4M x 36	(2) 1M x 36
48MB	(2) 2M x 36	(2) 4M x 36
64MB	(2) 8M x 36	None
64MB	(2) 4M x 36	(2) 4M x 36
72MB	(2) 1M x 36	(2) 8M x 36
80MB	(2) 8M x 36	(2) 2M x 36
96MB	(2) 4M x 36	(2) 8M x 36
128MB	(2) 8M x 36	(2) 8M x 36
Note: Board accepts EDO memory. Banks are interchangeable.

DIMM CONFIGURATION
Size	Bank 2	Bank 3
8MB	(1) 1M x 64	None
16MB	(1) 2M x 64	None
24MB	(1) 2M x 64	(1) 1M x 64
32MB	(1) 4M x 64	None
40MB	(1) 4M x 64	(1) 1M x 64
48MB	(1) 4M x 64	(1) 2M x 64
64MB	(1) 4M x 64	(1) 4M x 64
Note: Banks are interchangeable.

CACHE CONFIGURATION
Size	Bank 0	SL1	TAG
256KB	None	256KB module installed	(1) 32K x 8
256KB	(2) 32K x 32	None installed	(1) 32K x 8
512KB	(2) 32K x 32	256KB module installed	(1) 32K x 8

CACHE JUMPER CONFIGURATION
Size	JP29	JP30
256KB	Pins 1 & 2 closed	Pins 2 & 3 closed
512KB	Pins 2 & 3 closed	Pins 1 & 2 closed

CPU SPEED SELECTION (CYRIX)
CPU speed	Clock speed	Multiplier	JP23	JP24	JP36
120MHz	50MHz	2x	Open	Open	1 & 2, 3 & 4, 5 & 6
133MHz	55MHz	2x	Open	Open	1 & 2, 3 & 4
150MHz	60MHz	2x	Open	Open	1 & 2, 5 & 6
166MHz	66MHz	2x	Open	Open	3 & 4, 5 & 6
200MHz	75MHz	2x	Open	Open	1 & 2
Note: Pins designated should be in the closed position. The 200MHz chip may not run properly on this board.

CPU SPEED SELECTION (AMD)
CPU speed	Clock speed	Multiplier	JP23	JP24	JP36
66MHz	66MHz	1x	Closed	Open	3 & 4, 5 & 6
75MHz	50MHz	1.5x	Open	Open	1 & 2, 3 & 4, 5 & 6
90MHz	60MHz	1.5x	Open	Open	1 & 2, 5 & 6
100MHz	66MHz	1.5x	Open	Open	3 & 4, 5 & 6
Note: Pins designated should be in the closed position.

CPU SPEED SELECTION (INTEL)
CPU speed	Clock speed	Multiplier	JP23	JP24	JP36
75MHz	50MHz	1.5x	Open	Open	1 & 2, 3 & 4, 5 & 6
90MHz	60MHz	1.5x	Open	Open	1 & 2, 5 & 6
100MHz	66MHz	1.5x	Open	Open	3 & 4, 5 & 6
120MHz	60MHz	2x	Closed	Open	1 & 2, 5 & 6
125MHz	50MHz	2.5x	Closed	Closed	1 & 2, 3 & 4, 5 & 6
133MHz	66MHz	2x	Closed	Open	3 & 4, 5 & 6
150MHz	60MHz	2.5x	Closed	Closed	1 & 2, 5 & 6
166MHz	66MHz	2.5x	Closed	Closed	3 & 4, 5 & 6
180MHz	60MHz	3x	Open	Closed	1 & 2, 5 & 6
200MHz	66MHz	3x	Open	Closed	3 & 4, 5 & 6
Note: Pins designated should be in the closed position.

CPU VOLTAGE SELECTION (SINGLE OUTPUT)
Voltage	J100	J101	J102
3.2v	Open	Pins 1 & 2, 3 & 4 closed	Pins 3 & 4 closed
3.3v	Open	Pins 3 & 4 closed	Pins 3 & 4 closed
3.45v	Open	Pins 2 & 4 closed	Pins 3 & 4 closed
3.5v	Open	Pins 1 & 2 closed	Pins 3 & 4 closed
3.6v	Open	Pins 1 & 3 closed	Pins 3 & 4 closed
3.8v	Open	Open	Pins 3 & 4 closed

CPU VOLTAGE SELECTION (DUAL OUTPUT)
Voltage	V core	J100	J101	J102
3.2v	2.5v	1 & 2, 3 & 4	1 & 2, 3 & 4	1 & 2
3.3v	2.7v	3 & 4	3 & 4	1 & 2
3.45v	2.8v	2 & 4	2 & 4	1 & 2
3.5v	2.9v	1 & 2	1 & 2	1 & 2
3.6v	3.0v	1 & 3	1 & 3	1 & 2
3.8v	3.2v	Open	Open	1 & 2
Note: Pins designated should be in the closed position.