Processor	80286
Processor Speed	8MHz
Chip Set	Unidentified
Video Chip Set	None
Maximum Onboard Memory	6MB
Maximum Video Memory	None
Cache	None
BIOS	Unidentified
Dimensions	330mm x 218mm
I/O Options	Riser slot
NPU Options	80287

CONNECTIONS
Purpose	Location	Purpose	Location
Speaker/LED	P506	External battery	P509
Power supply	P507	Riser slot	SL1

USER CONFIGURABLE SETTINGS
Function		Label	Position
»	Factory configured - do not alter	P501	Unidentified

DRAM CONFIGURATION
Size	Bank 0	Bank 1	Bank 2
1MB	(2) 256K x 9	(2) 256K x 9	None
1.5MB	(2) 256K x 9	(2) 256K x 9	(2) 256K x 9
2MB	(2) 1M x 9	None	None
2.5MB	(2) 1M x 9	(2) 256K x 9	None
3MB	(2) 256K x 9	(2) 256K x 9	(2) 1M x 9
4MB	(2) 1M x 9	(2) 1M x 9	None
4.5MB	(2) 256K x 9	(2) 1M x 9	(2) 1M x 9
6MB	(2) 1M x 9	(2) 1M x 9	(2) 1M x 9

DRAM JUMPER CONFIGURATION
Size		J516
»	256KB x 9 installed in banks 1 or 2	Pins 2 & 3 closed
	1M x 9 installed in banks 1, 2 or 3	Pins 1 & 2 closed

NPU SPEED SELECTION
Speed		J505
	8MHz	Pins 1 & 2 closed
	80287 oscillator (not used)	Pins 3 & 4 closed
	24MHz (not used)oscillator	Pins 5 & 6 closed
»	16MHz oscillator	Pins 7 & 8 closed
	14MHz oscillator	Pins 9 & 10 closed

PARALLEL PORT SELECTION
Setting		J501	J502	J503	J506	J511	J512
»	Used as printer	1 & 2	1 & 2	1 & 2	1 & 2	1 & 2	1 & 2
	Used as scanner	2 & 3	2 & 3	2 & 3	2 & 3	2 & 3	2 & 3
Note: Pins designated should be in the closed position.

CHIPSPAK IC SELECTION
Unit		J504
»	1	Pins 1 & 2 closed
	2	Pins 3 & 4 closed
	3	Pins 5 & 6 closed
	4	Pins 7 & 8 closed
»	IBM printer compatibility	Pins 9 &10 closed

PCI TRIGGER SELECTION
Setting		J510
»	Color video card	Pins 1 & 2 closed
»	SCP control	Pins 3 & 4 closed
	Keyboard type	Pins 5 & 6, 7 & 8 closed
	NPU clock mode	Pins 9 &10 closed