ACCTON TCHNOLOGY CORPORATION
ETHERPAIR PCMCIA
Card Type |
Network Interface Card |
NIC Type |
Ethernet |
Maximum Onboard Memory |
16KB |
Boot ROM |
Unidentified |
Network Transfer Rate |
10Mbps |
Topology |
Star |
Wiring Type |
Unshielded twisted pair |
Data Bus |
PCMCIA |
CONNECTIONS | |||
Function |
Label |
Function |
Label |
RJ-45 connector |
CN1 |
15-pin flat connector |
CN2 |
DIAGNOSTIC LED(S) | |||
LED |
Color |
Status |
Condition |
Tx/Rx |
Green |
On |
Data is being transmitted/received |
Tx/Rx |
Green |
Off |
Data is not being transmitted/received |
LINK |
Green |
On |
UTP link is good |
LINK |
Green |
Off |
UTP link is broken |
Note: Exact locations of LEDs are unidentified. |
MISCELLANEOUS TECHNICAL NOTES |
Note: The ferrite bead should be clamped over the module cable as close as possible to 15-pin flat connector. |