LINKSYS
ETHERFAST 10/100 LAN CARD (LNE100TX)
Card Type |
Network Interface Card |
NIC Type |
Ethernet |
Maximum Onboard Memory |
Unidentified |
Boot ROM |
Not available |
Network Transfer Rate |
10/100Mbps (20/200Mbps full duplex) |
Topology |
Star |
Wiring Type |
Unshielded twisted pair |
Data Bus |
32-bit PCI |
CONNECTIONS | |
Function |
Label |
RJ-45 UTP connector |
CN1 |
DIAGNOSTIC LED(S) | |||
LED |
Color |
Status |
Condition |
LED1 |
Unidentified |
On |
Network connection is good |
LED1 |
Unidentified |
Off |
Network connection is broken |
LED2 |
Unidentified |
On |
Network is operating at 100Mbps |
LED2 |
Unidentified |
Off |
Network is operating at 10Mbps |
LED3 |
Unidentified |
Blinking |
Data is being transmitted/received |
LED3 |
Unidentified |
Off |
Data is not being transmitted/received |
LED4 |
Unidentified |
On |
Full duplex mode enabled |
LED4 |
Unidentified |
Off |
Half duplex mode enabled |