TDC 3500, TDC 3700

TANDBERG DATA

TDC 3500, TDC 3700

Device Type

Tape Drive

Interface

SCSI-2

Format

QIC-3040 (read only for TDC-3700)

QIC-3210

Sustained Transfer Rate

300KBPS

Size

3.5 in. half height

View

Top

CONNECTIONS

Function

Label

Ground connector

CN1

USER CONFIGURABLE SETTINGS

Setting

Label

Position

»
Factory configured - do not alter. (BIRDOUT Test)

JP1/Pins 1 & 2

Unidentified

»
Factory configured - do not alter. (BIRDIN Test)

JP1/Pins 3 & 4

Unidentified

Parity enabled

JP1/Pins 11 & 12

Closed

Parity disabled

JP1/Pins 11 & 12

Open

Termination enabled

JP1/Pins 21 & 22

Closed

Termination disabled

JP1/Pins 21 & 22

Open

DRIVE SELECT ID

Drive ID

JP1/Pins 13 & 14

JP1/Pins 15 & 16

JP1/Pins 17 & 18

0

Open

Open

Open

1

Open

Open

Closed

2

Open

Closed

Open

3

Open

Closed

Closed

4

Closed

Open

Open

5

Closed

Open

Closed

6

Closed

Closed

Open

7

Closed

Closed

Closed

Note: Pins 2 & 4 must be open to enable SCSI select.

TERMINATION POWER SELECTION

Setting

JP1/Pins 19 & 20

»
TERMPWR supplied by drive

Closed

TERMPWR supplied by SCSI interface to drive

Open

MANUFACTURERS RECOMMENED MEDIA

Drive

Tape

Capacity Without Compression

Capacity With Compression

TDC 3500

3M® MC3000 295ft.

640MB

Unidentified

TDC 3500

3M® MC3000XL 400ft.

840MB

Unidentified

TDC 3500

SONY® QW3000XL 400ft.

1.0GB

Unidentified

TDC 3700

SONY® QW3000MP++ 425ft.

2.3GB

Unidentified

DIAGNOSTIC LED(S)

LED

Color

Status

Condition

LED1

Green

Blink 1

Cleaning operation in progress

LED1

N/A

Off

Cleaning operation completed

LED1

Amber

Blink 1

DPCC 2 has completed all cleanings and is out of filament

Note: A Dry Process Cleaning Cartridge (TDS DPCC-2000) is required to enable the above cleaning

functions.

1 LED will blink at two cycles per second.

2 Dry Process Cleaning Cartridge.

1) If eject button is pressed during cleaning operations, LED will blink green at six cycles per second. The DPCC will be automatically ejected when the cleaning process is completed, cleaning operations will not be interrupted by the eject command, and the LED will turn off when the eject sequence is completed.

2) If eject button is pressed before cleaning operations, LED will blink green at six cycles per second, and the DPCC will be ejected immediately. If drive is already performing a DPCC insert sequence, it will be completed before the cartridge is ejected.

3) If eject button is pressed after cleaning operations are completed, LED will blink green at six cycles per second, and the cartridge will be ejected immediately.

Device Type	Tape Drive
Interface	SCSI-2
Format	QIC-3040 (read only for TDC-3700) QIC-3210
Sustained Transfer Rate	300KBPS
Size	3.5 in. half height
View	Top

USER CONFIGURABLE SETTINGS
Setting		Label	Position
»	Factory configured - do not alter. (BIRDOUT Test)	JP1/Pins 1 & 2	Unidentified
»	Factory configured - do not alter. (BIRDIN Test)	JP1/Pins 3 & 4	Unidentified
	Parity enabled	JP1/Pins 11 & 12	Closed
	Parity disabled	JP1/Pins 11 & 12	Open
	Termination enabled	JP1/Pins 21 & 22	Closed
	Termination disabled	JP1/Pins 21 & 22	Open

DRIVE SELECT ID
Drive ID	JP1/Pins 13 & 14	JP1/Pins 15 & 16	JP1/Pins 17 & 18
0	Open	Open	Open
1	Open	Open	Closed
2	Open	Closed	Open
3	Open	Closed	Closed
4	Closed	Open	Open
5	Closed	Open	Closed
6	Closed	Closed	Open
7	Closed	Closed	Closed
Note: Pins 2 & 4 must be open to enable SCSI select.

TERMINATION POWER SELECTION
Setting		JP1/Pins 19 & 20
»	TERMPWR supplied by drive	Closed
	TERMPWR supplied by SCSI interface to drive	Open

MANUFACTURERS RECOMMENED MEDIA
Drive	Tape	Capacity Without Compression	Capacity With Compression
TDC 3500	3M® MC3000 295ft.	640MB	Unidentified
TDC 3500	3M® MC3000XL 400ft.	840MB	Unidentified
TDC 3500	SONY® QW3000XL 400ft.	1.0GB	Unidentified
TDC 3700	SONY® QW3000MP++ 425ft.	2.3GB	Unidentified

DIAGNOSTIC LED(S)
LED	Color	Status	Condition
LED1	Green	Blink 1	Cleaning operation in progress
LED1	N/A	Off	Cleaning operation completed
LED1	Amber	Blink 1	DPCC 2 has completed all cleanings and is out of filament
Note: A Dry Process Cleaning Cartridge (TDS DPCC-2000) is required to enable the above cleaning functions. 1 LED will blink at two cycles per second. 2 Dry Process Cleaning Cartridge. 1) If eject button is pressed during cleaning operations, LED will blink green at six cycles per second. The DPCC will be automatically ejected when the cleaning process is completed, cleaning operations will not be interrupted by the eject command, and the LED will turn off when the eject sequence is completed. 2) If eject button is pressed before cleaning operations, LED will blink green at six cycles per second, and the DPCC will be ejected immediately. If drive is already performing a DPCC insert sequence, it will be completed before the cartridge is ejected. 3) If eject button is pressed after cleaning operations are completed, LED will blink green at six cycles per second, and the cartridge will be ejected immediately.