Card Type	ISDN BRI Access Router
Chip Set	Unidentified
Wiring Type	Unshielded twisted pair
I/O Options	Power, 10 BaseT Ethernet interface via RJ-45 connector, RJ-11 telephone line (2) Ethernet interface via BNC connector, 9-pin console port, ISDN BRI U interface via RJ-45 connector,
Ethernet Transfer Rate	10Mbps
ISDN Data Rate	128Kbps
ISDN Modulation Protocol	PPP, MLPPP
Line Coding	2B1Q
Data Bus	External

CONNECTIONS
Function	Label	Function	Label
DC power connector	CN1	ISDN BRI U interface (RJ-45)	CN5
9-pin DTE port	CN2	Telephone line 1 (RJ-11) (Optional)	CN6
Ethernet interface (BNC)	CN3	Telephone line 2 (RJ-11) (Optional)	CN7
10 BaseT Ethernet interface (RJ-45)	CN4

DIAGNOSTIC LED(S)
LED	Color	Status	Condition
PWR	Green	On	Power is on
PWR	Green	Off	Power is off
DGN	Green	Blinking (fast)	Power-up reboot is in progress
DGN	Green	Blinking (slow)	Line connection has been established
DGN	Green	Off	Connection is broken or SPID number registration failed
ACT1	Yellow	Blinking	Data is being transmitted/recieved on Ethernet interface
ACT1	Yellow	Off	Data is not being transmitted/recieved on Ethernet interface
LN1	Green	On	10 BaseT connection is good
LN1	Green	Off	10 BaseT connection is broken
ACT2	Yellow	Blinking	Data is being transmitted/recieved on ISDN interface
ACT2	Yellow	Off	Data is not being transmitted/recieved on ISDN interface
LN2	Green	Blinking (fast)	ISDN connection is broken or a loss of synchronization condition exists
LN2	Green	Blinking (slow)	ISDN connection is good
P1	Yellow	On	Telephone line 1 is off-hook
P1	Yellow	Off	Telephone line 1 is on-hook
P2	Yellow	On	Telephone line 2 is off-hook
P2	Yellow	Off	Telephone line 2 is on-hook