EVEREX SYSTEMS, INC.
EVERCOM 24
Modem Type |
Data |
Maximum Data Rate |
2400 bps |
Maximum Fax Rate |
N/A |
Data Bus |
8-bit ISA |
Fax Class |
Class II |
Data Modulation Protocol |
Bell 103A & 212A, CCITT V.22 & V.22bis & V.21 |
Fax Modulation Protocol |
N/A |
Error Correction/Compression |
Unidentified |
CONNECTIONS | |||
Purpose |
Location |
Purpose |
Location |
Line out |
CN1 |
Line in |
CN2 |
COM PORT SETTINGS | ||
COM |
SW1/1 |
SW1/2 |
COM1 |
Off |
Off |
COM2 |
On |
Off |
COM3 |
Off |
On |
COM4 |
On |
On |
&H PROPRIETARY COMMAND | |
Note: |
The &H displays help information. |
Command |
Protocol |
&H0 |
Display the AT command set summary. |
&H1 |
Display the S-register summary. |
&H2 |
Display the Dial command summary |
Dn PROPRIETARY COMMAND | |
Note: |
The Dn dialing command. |
Command |
Protocol |
D; |
Dial then return to command state, leaving the speaker on. |
D/ |
Causes a 1/8th of second pause in the dialing string |
Fn PROPRIETARY COMMAND | |
Note: |
The Fn Full duplex commands. |
Command |
Protocol |
F1 |
Forces the modem to not echo data you are sending to the monitor. |
F0 |
Forces the modem to echo data you are sending to the monitor. |
&E PROPRIETARY COMMAND | |
Note: |
The &E TELSET Off hook toggle. |
Command |
Protocol |
&E0 |
TELSET Off hook messages are enabled. |
&E1 |
TELSET Off hook messages are disabled. |