AUVA COMPUTER, INC.
VGA-V (52100T)
Card Type |
Video card |
Video Chip Set |
Tseng Labs |
Highest Resolution Supported |
1024 x 768 |
Maximum Video Memory |
1MB DRAM |
Data Bus |
8/16-bit ISA |
Video Types Supported |
Monochrome, CGA, EGA, VGA |
CONNECTIONS | |||
Function |
Label |
Function |
Label |
Feature connector |
CN1 |
15-pin analog video port |
CN2 |
USER CONFIGURABLE SETTINGS | |||
Function |
Label |
Position | |
» |
IRQ 2/9 disabled |
J1 |
Pins 2 & 3 closed |
IRQ 2/9 enabled |
J1 |
Pins 1 & 2 closed | |
» |
Scan rate >48.7KHz (non-interlaced mode) |
SW3 |
Open |
Scan rate <48.7KHz (interlaced mode) |
SW3 |
Closed | |
» |
Autodetect enabled |
SW4 |
Open |
Autodetect disabled |
SW4 |
Closed |
DRAM CONFIGURATION |
Note: 256KB, 512 KB, or 1MB DRAM configurations available. The orientation of the banks and size of chips used are unidentified. |
MONITOR DETECTION CONTROL | ||
Function |
J6 | |
» |
IBM standard monitor pinout |
Pins 1 & 2 closed |
Non-standard color pinout |
Open | |
Non-standard monochrome pinout |
Pins 2 & 3 closed | |
Note: If your VGA monitor boots up in monochrome mode remove the jumper, and if your VGA monochrome monitor does not display correctly place the jumper over pins 2 & 3. |